- Tutorial is only for Samsung Galaxy Note 3 model number SM - N900. Check the info listed in the 'About Device' section for model number.
Here is Tutorial for Updating Android 4.4.2 KitKat N900XXUDND1 on Samsung Galaxy Note 3:
- Download the N900XXUDND1 zip firmware and save the files on your computer. You will get a tar.md5 file and other files.
- Install Samsung Usb Drivers on your PC.
- Download Odin v3.07; extract the zip file and run it as an Administrator.
- Switch off your phone and boot it into download mode by pressing and holding Volume Down and Home buttons together, then press Power button. Press Volume Up key to enter into Download Mode.
- Connect your smartphone to your computer via USB cable and click the AP button once entering ODIN.
- Load the N900XXUDND1 tar.md5 firmware file into ODIN.
- Click on the Start button to begin the installation process.
- "PASS" message will be displayed once the installation is complete and the phone will reboot automatically.
- You can unplug your device from your computer once Samsung logo appears on the home screen and enjoy ;)
No comments:
Post a Comment